Grey Natural Stone

Grey Sandstone Wall Cladding Decorative Mosaic Tiles Interior Wall Panel 12.96m2

Grey Sandstone Wall Cladding Decorative Mosaic Tiles Interior Wall Panel 12.96m2
Grey Sandstone Wall Cladding Decorative Mosaic Tiles Interior Wall Panel 12.96m2
Grey Sandstone Wall Cladding Decorative Mosaic Tiles Interior Wall Panel 12.96m2
Grey Sandstone Wall Cladding Decorative Mosaic Tiles Interior Wall Panel 12.96m2
Grey Sandstone Wall Cladding Decorative Mosaic Tiles Interior Wall Panel 12.96m2
Grey Sandstone Wall Cladding Decorative Mosaic Tiles Interior Wall Panel 12.96m2
Grey Sandstone Wall Cladding Decorative Mosaic Tiles Interior Wall Panel 12.96m2
Grey Sandstone Wall Cladding Decorative Mosaic Tiles Interior Wall Panel 12.96m2
Grey Sandstone Wall Cladding Decorative Mosaic Tiles Interior Wall Panel 12.96m2
Grey Sandstone Wall Cladding Decorative Mosaic Tiles Interior Wall Panel 12.96m2

Grey Sandstone Wall Cladding Decorative Mosaic Tiles Interior Wall Panel 12.96m2   Grey Sandstone Wall Cladding Decorative Mosaic Tiles Interior Wall Panel 12.96m2

UKs Best supplier of Paving and Landscaping products. Special offers and discounts for trade and wholesale customers. Indian Grey Sandstone Wall Cladding Mosaic 3D Effect Panel. Low Water Absorption, Slip-Resistant, Frost-Resistant.

Outdoor Flooring, Terrace Flooring, Garden Patio. Is a natural Indian stone extracted directly from quarries situated in. Comes in dark grey to light grey shades with a variation of tones and patterns. Grey sandstone, Bhilwara grey sandstone.

The basic formation of Kandla grey sandstone. Conspires high-quality quartz grains cemented together by secondary silica calcite which makes it extremely hard-wearing and tough. Due to the hardness and durability of this stone makes. An ideal choice for your home exterior.

Vailable at Strata Stones comes. A riven surface and hand cut.

Edges for an organic and natural appearance. Riven surfaced stone flooring delivers excellent slip-resistance for added functionality. This Indian sandstone is calibrated to.

A consistent thickness of 22 mm to. Is famously recognized for its highly-resistant nature to acid, alkali, moss which makes it a suitable option for a beach house or chemical industries. Can handle anything a busy life will throw at it.

As an advantage of l. Ayer accumulation due to sedimentation and pressure compaction.

Split Pack Facility as per customer request. You can find mixed-sized patio packs at Strata Stones in square and rectangle shape to let you create various. Installation plan can be found along with the product images. Do fade its color when exposed to direct sunlight, you can simply seal your stone paving with our high-quality sealers and protect it from weathering for a long time. Also, you wouldnt want your stone flooring to look cheap or unfinished and to achieve that seamless arrangement of the tiles. You might want to take a look at our exceptional jointing compounds. Is commonly used for outdoor paving, window sills, and huge landscaping projects. However, the tonal variations of this Indian sandstone make it stand out in the crowd which turns out to be a great option for various interior applications. The thickness of uncalibrated stones vary hence they deliver a. Look to your home exterior. Hand-split sandstone with a raw and natural finish on the surface. The edges of this stone are cut neatly to a specified size for a straight and clean paving arrangement. The space between adjacent slabs is called joint width where the jointing compound will be filled.

Thinking of replacing your traditional garden landscaping or terrace flooring with uniquely shaped or sized natural Indian stones? Strata Stones Bespoke project is the one-step solution for all your needs, be it a traditional addition to your terrace flooring or a contemporary fix to your patio area.

We have an in-house team of professionals working everyday towards the betterment of our services. With the help of Bespoke project, you can get customized solutions on stone finishes, shape and size of the stone, and more. You can easily reach us through eBays. Option for any further queries or details.

The photos in the listing show general characteristics of the color, it might differ from the actual product supplied. ALL OTHER POSTCODES, OFF-SHORE ISLANDS, SCOTTISH HIGHLANDS, NORTHERN IRELAND. All deliveries will be kerbside/bottom of the driveway only. Any alternative arrangements made between yourself the customer and the driver will not be part of our contract between our company, yourself and the courier.

Deliveries lorries vary in size and maybe upto 28 tonne, if there are any difficulties with access in reaching your property, such as narrow roads, steep hills, long driveways. If you do notice any damages or you are unsure, but unable to check please sign the form as unchecked or damaged. Strata Stones is the UK chapter of Stone Age group of companies based out of Jaipur, India, where we operate through our own quarries and manufacturing units situated in north and south regions of India. Strata Stones welcomes you on an incredible journey amidst a wide spectrum of natural dimensional stones, fulfilling all your needs of natural Indian stone products. Blue limestone, Autumn limestone, Rippon buff sandstone, and many more.

Strata Stones is also a part of UK Stone Federation to help validate and support the credentials offered to our consumers. ISO9001:2008 and SA8000:2008. Certifications are complied with Strata Stones to maintain the safety and quality of each product.

Strata Stones is one of the best online platforms for natural Indian stones backed by the parent company Stone Age Pvt. Which ensures a deep knowledge of the raw material gained from decades of expertise in extracting the stone from company owned quarries located in various states of India. Strata Stones is an amalgamation of traditional processing techniques along with modern. Technologies to give your home a fresh yet timeless makeover.

Its always difficult calculating cuts and how much paving is required, we always recommend that you allow a minimum of 5% for cuts and any potential breakages. We recommend that you set this aside for cuts. Laying guides are something we can supply to you; however, we do advise that every garden and fitting requirements are different and a laying guide should not be used. Once the order has been received or in transit, we ask that you notify us within 7 days of receipt of the items.

Strata flagstones are ideal for patios, paths and courtyards and we have provided this installation guidance to help ensure you get many years of trouble-free service. Installation tips such as this can never be comprehensive for every project and we urge you to seek professional on-site advice for any specific issues not covered in this brief guide. Getting ready to lay your patio. Spade and/or shovel Wheelbarrow Lump hammer Rubber mallet Brick and/or pointing trowel Spirit level Sweeping brush String lines Wooden pegs or steel pins for Fastening line 2.4 3.6m long timber straightedge Cement mixer Protective gloves Protective eyewear.

Flagstones need to be laid to falls to ensure that any water on the surface will drain away properly. We recommend a fall of 1:60, which is equivalent to 17mm per linear meter. This is sufficient to drain the paving without it being noticeably sloped. The area to be paved needs to be cleared of all vegetation and topsoil, to a depth of at least 65mm. Remember: paving should always be laid at least 150mm lower than the Damp Proof Course (DPC) of any adjacent building.

Use taut string lines as guides to both alignment and surface level. These can be fastened to pegs knocked into the ground or nails fixed into masonry. Use string lines at the edges of the pavement and then use a long timber straightedge to span from the flags to the string lines to check for level. The flags need to be laid onto a full mortar bed.

This means the bed underneath each piece extends beneath the entire flagstone, with no gaps or voids. Some less experienced installers lay flags onto spots or dabs of mortar, which we cannot recommend as these spots do not offer full support to the flags and often cause problems in the months ahead.

The mortar should be a mix of 4 parts sharp sand with one part cement, mixed to a consistency that is moist but not overly wet. Wet mortar can be messy. Light coloured flagstones, and those formed from granite are often prone to discolouration when laid onto mortars made using strongly-coloured sand, such as the orangey sands common in SE England. This will minimise any risk of discolouration whilst ensuring your new paving is properly bedded and fully supported. The mortar bed should be 35mm to 60mm thick. Where the mortar would be thicker than this, or where levels need to be built-up, this should be done using crushed stone such as Type 1 which is readily available at most Builders Merchants. Aim to have a reasonably consistent bed thickness throughout. Its best to use a powered mixer to prepare the mortar. They make light work of the mixing and allow you to save your energy for laying the flags, rather than mixing sand and cement. Mix only as much bedding mortar as will be used in 30-60 minutes. Mortar starts to harden as soon as it is mixed and, in warm weather, it may become stiff and unworkable in as little as 20 minutes. Be sure to wear protective eyewear and gloves when mixing mortar. Cement is strongly alkaline when wet, so dust or mortar splashes can damage your eyes and your skin. Wear long sleeved clothing and wash any splashes with clean water immediately. If your patio involves a lot of cutting we would advise that you hire a powered cutting tool with a diamond tipped blade (any hire shop will advise you of the machine and blade you will need if you advise them of what you are intending to cut). Please take care and also make sure that your hire shop issues you will full instructions and relevant safety equipment, including goggles. We recommend that whenever laying natural stone you should mix your paving from 3-4 different packs (where possible) as you lay your patio. This will allow the colours to blend and help to improve any shade variations that may occur between packs, giving your patio a more natural look. Using a brick or pointing trowel, spread the mortar over an area approximately 100mm longer and wider than the flag to be laid.

Ripple the surface of the bed with the point of the trowel so that there will be some give once the flag is placed onto the mortar. Lift the flag into position and carefully lower it onto the bed. With larger flags (600x600mm or larger) it is best to have an assistant helping to lift and lower the flag.

Once in position, the flag should be 5-10mm high, and should then be tapped down to the correct level using the rubber mallet. Dont hit the flagstone at the corners or in the exact centre. This can break the flagstone and, even if it doesnt, it usually results in uneven laying. Aim for the points that are located roughly halfway between the centre and the corners, and use a succession of light but firm taps rather than heavy blows. Tap down one edge once or twice and then tap the opposite edge, alternating as required until the flag is at the correct level.

If the flag is not going down on the bed, you may need to lift it out and remove some of the bedding mortar. Take care not to allow the bedding mortar to stain the flagstone edges when lifting it from the bed. Similarly, if the flag goes down too far, you may need to add mortar to the bed to achieve the correct level.

Use the spirit level and/or the straightedge to check the flag is falling in the right direction and is at the correct level. Be certain that the flag is correct before moving on to prepare a bed for the next flag.

Remember to allow for jointing. Many flagstones are laid with a 10-15mm wide joint that can be filled with mortar or a resin-based jointing material once the bed mortar has hardened (usually 24-48 hours). With some random layouts, you may find that some joints need to be 8-12mm wide while others are more like 15-18mm wide.

This is nothing to worry about, but should be borne in mind when laying the flags. You may find that you need to adjust the width of some joints as the laying proceeds. There should be no significant lips between adjacent flagstones. They should be roughly (± 2mm) level with each other. At free edges of the paving ie: where the flagstones would lie against grass or flower beds, etc.

You may wish to bring the mortar bedding up the edge of the flagstones to prevent them moving sideways. Traditionally, flagstones were pointed with a cement mortar. This would be made using a 3:1 mix of building sand (softer and less coarse than the sand used for the bed mortar) with cement, but as mentioned previously, when working with light-coloured sandstones and granites, its often better to use silver sand with white cement. The jointing mortar is mixed to a stiffer consistency than bed mortar, and then pushed into the joint from the blade of a trowel using a small pointing trowel, packing it into the joint before smoothing off with the pointing trowel or a special pointing iron that gives a flat or semi-round profile.

This takes a great deal of care to ensure the mortar does not stain the edges of the flagstones and it can be very time-consuming for those not familiar with it. Nowadays, many contractors use resin-based or polymeric mortars to joint flagstones. These are simply brushed into the joints, and any surplus swept off the surface.

The resin is completely transparent, so cannot permanently stain the flagstones. Occasionally, a slightly shiny film or residue may be left behind on the flagstone surface, but this should weather away in a few days.

These resin or polymeric mortars are more expensive than a sand/cement mortar, but they are very easy to use, very quick, and they avoid any risk of staining, even with light-coloured and/or granite flagstones, so may be worth considering. Some homeowners prefer the look of their paving when it is damp or wet, as the moisture tends to bring out the natural colour of the stone. This effect can be achieved permanently by using a good quality colour enhancer. Its worth noting that different types of stone look better with different colour enhancers, so try to choose a product that is specific to your material rather than a jack-of-all-trades.

Always test the colour enhancer on a surplus flagstone or sett or in a discreet corner before applying it to the whole pavement. Allow it to dry and leave it for a few days as the character can often change as the product cures. While colour enhancer can improve the looks of the stone, sealants can both enhance the colour and protect the paving from accidental staining or colonisation by algae and lichens. There is a great deal of variety with sealants, both in terms of the type of chemicals used to manufacture them, and in their finished appearance.

Its vitally important to appreciate that sealants should only ever be applied to paving that is bone dry. The presence of any moisture on the pavement surface or within the jointing can seriously affect the way in which the sealant cures, and in some cases, will result in an unattractive milky-white discoloration which can only be corrected by chemically stripping the sealant.

Consequently, sealing should only be undertaken during the warmer, drier summer months. If the paving was laid during winter or spring, it may be a good idea to have it cleaned prior to sealing, but be sure to allow at least two days for it to thoroughly dry before applying the sealant in accordance with the Manufacturers instructions. Strata Stones cannot accept any responsibility for any mortar staining, cutting or problems during the laying of their sandstone and limestone. The item "Grey Sandstone Wall Cladding Decorative Mosaic Tiles Interior Wall Panel 12.96m2" is in sale since Thursday, June 24, 2021. This item is in the category "Home, Furniture & DIY\DIY Materials\Cladding & Outdoor Trim\Cladding".

The seller is "stratastonesltd" and is located in Ipswich. This item can be shipped to United Kingdom.

  1. Shape: Rectangle
  2. Fire Rating: A1
  3. Colour: Grey
  4. Country/Region of Manufacture: India
  5. Style: Modern
  6. Custom Bundle: No
  7. Item Width: 150mm
  8. Material: Indian Sandstone Grey wall ledger
  9. Unit Quantity: None
  10. Location: Exterior/ Interior
  11. Type: Panel
  12. Features: Indian sandstone walling tiles
  13. Package Quantity: 1
  14. Item Thickness: 10-20mm
  15. Profile: Rectangle Edge
  16. MPN: Does Not Apply
  17. Finish: Natural
  18. Item Length: 600mm
  19. Fixings Supplied: No
  20. Coverage: 12.96m2
  21. Brand: Strata Stones
  22. Manufacturer Warranty: None
  23. Orientation: Horizontal

Grey Sandstone Wall Cladding Decorative Mosaic Tiles Interior Wall Panel 12.96m2   Grey Sandstone Wall Cladding Decorative Mosaic Tiles Interior Wall Panel 12.96m2