Himalayan Grey Porcelain Paving Patio Slabs 600x900mm 40 Tiles 21.6sqm

  

NEXT DAY upgrade available on the checkout page. All our samples are offcuts from our actual Paving, measuring approx 100mm x 100mm. Our samples will give you a clear indication of the beauty of the stone.

Recommended 10% Allowance for Every Order. It is recommended industry standard that you add 10% onto your total measurements so that you have allowed for Cuts, wastage, breakages, and spares.

HIMALAYAN GREY PORCELAIN PAVING 600X900. MULTI LISTING PLEASE SEE DROP DOWN MENU FOR SELECTION. Sample = 1 x 100mmx100mm offcut of the paving - Samples may vary in colour tone from the paving due to batch coding, please use as a guide. 40 slabs = 21.6sqm coverage approx 22.5 sqm when laid and jointed. Becoming increasingly popular and a great alternative to Natural Stone, our outdoor Porcelain paving is a great low maintenance contemporary range of paving.

All our porcelain tiles are vitrified meaning a low water absorption of less than 0.5%. Porcelain is hardwearing, ideal for the outdoors and easy to clean. R11 Rated for anti slip.

It is industry standard to allow an extra 10% for cuts, wastage and any breakages. Please consider this when placing your order. It is not always possible due to how fragile the slabs are in transit to send out smaller quantities or replacements. For Reference, it is advised before laying to use a porcelain paving prima on the underside of the slabs. This will help with the adhesion between the surfaces.

Porcelain paving does not need to be sealed, but can with a porcelain paving sealer if this is a preference. We use 3rd party, haulage couriers. Breakages, On occasion due to the nature of the material being transported breakages do occur during transit, we check and photograph all of our deliveries prior to dispatch to ensure no slabs are broken. If when opening the crate you notice any breakages, these must be photographed whilst on the pallet or when lifting.

Ensure when opening the pack that you have adequate support so that the paving does not fall off of the pallet. In most instances, the slabs can be set aside and used for the offcuts required in your project and it should not affect your installation if the 10% has been allowed. Once we have received your photos someone will be in touch to go through options with you.

Quality and colouring: Porcelain paving like indoor tiles are batch coded. We endeavour to try to always source the same batch, however this is not always possible. It is advised to allow an extra 10% on all orders and to make sure you order in one go enough paving to complete any projects you plan to complete in the same area as you may not be able to match at a later stage. Please note - Our pictures are taken for reference in colouring, patterns and tones, They can be taken wet or dry. Porcelain paving is batch coded and there may be a small variance.

We offer Samples from our menu so that you can get an idea of the colouring and feel. We want you to have complete confidence that your order will be delivered on time and with ease. The couriers operate using a tail-lift and manual pump truck service therefore will only guarantee kerbside drop to the nearest access point on a hard stand surface.

Deliveries cannot be completed on surfaces such as gravel, slate chippings, grass, soft verges or sloped areas. Deliveries can be made between the hours of 8am and 6pm. On all deliveries, where an accurate mobile number is provided, we will request that the courier to contact you approx 1 hour before they are due to arrive. Tracking is also provided with your order once dispatch has been made.

(Please Note we do not deliver to BT, GY, JE postcodes). Once the order has been received or in transit, we ask that you notify us within 7 days of receipt of the items. Riven: Textured, Slightly uneven, this natural surface results when stones like sandstone and slate are quarried and split. The type of stone depends how heavily riven the surface will be.

Shotblast: A textured surface is created as sand is blasted at high pressure. Shot-blasting is a similar process. The process often lightens the stone as well as masking the character by hiding the veins and fossils within the stone. Honed: Flat smooth, the stone is grinded and sanded using coarse grit abrasives to create a smooth but satin, non-reflective finish. Flamed: A rough textured finish results as the stone is torched with a flame which causes a thermal shock and fractures the crystals within the stone. This is a popular way of finishing natural granite paving. Sawn Edge: The natural stone is sawn and without any other processes such as honing, tumbling or flaming, the saw marks are likely to be visible.

Calibrated: Those which have gone through a machining process to ensure that they have a fairly regular and even depth (1-2mm tolerance) This makes them quicker and easier for professional installers to lay. Handcut: Paving is cut by hand/ chiselled edge, will be different depths on each edge, sizes and surface will be riven.

Brushed: Steel or hard nylon brushes are used along with water to brush and wear out softer parts of the stone. This creates a textured finish and an antique look.

Raj Green Sandstone paving natural Indian Patio slabs Mixed sizes 22mm.